Oxidative Stability and Changes in Chemical Composition of Extra Virgin Olive Oils After Short‐Term Deep‐Frying of French Fries

We aimed at investigating oxidative stability and changes in fatty acid and tocopherol composition of extra virgin olive oil (EVOO) in comparison with refined seed oils during short‐term deep‐frying of French fries, and changes in the composition of the French fries deep‐fried in EVOO. EVOO samples from Spain, Brazil, and Portugal, and refined seed oils of soybean and sunflower were studied. Oil samples were used for deep‐frying of French fries at 180 °C, for up to 75 min of successive frying. Tocopherol and fatty acid composition were determined in fresh and spent vegetable oils. Tocopherol, fatty acid, and volatile composition (by SPME–GC–MS) were also determined in French fries deep‐fried in EVOO. Oil oxidation was monitored by peroxide, acid, and p‐anisidine values, and by Rancimat after deep‐frying. Differential scanning calorimetry (DSC) analysis was used as a proxy of the quality of the spent oils. EVOOs presented the lowest degree of oleic and linoleic acids losses, low formation of free fatty acids and carbonyl compounds, and were highly stable after deep‐frying. In addition, oleic acid, tocopherols, and flavor compounds were transferred from EVOO into the French fries. In conclusion, EVOOs were more stable than refined seed oils during short‐term deep‐frying of French fries and also contributed to enhance the nutritional value, and possibly improve the flavor, of the fries prepared in EVOO.     

Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

Effect of nanofiller on fibril formation in melt‐drawn HDPE/PA6 microfibrillar composite

Effect of layered silicates on structure of microfibrillar composites (MFCs) with reinforcing PA6 fibrils formed in situ by melt drawing was studied. Clay was added to HDPE/PA6 MFC using different mixing protocols including simultaneous addition, application of pre‐made masterbatches with both constituents and their combinations. In all cases, majority of nanofiller (NF) was contained inside PA6 fibrils. On the other hand, fibrils dimensions were significantly affected by the clay addition protocol; their marked increase in the case of simultaneous addition of all components and application of HDPE/C30 nanocomposite indicate important effect of NF migration to the PA6 phase in the course of mixing and melt drawing. The effect of properties of PA6 and HDPE phases and NF migration on the morphology evolution is discussed. It is shown that the fiber shape and volume after sample drawing are controlled by the interplay between the dispersed fibril extension and coalescence. POLYM. ENG. SCI., 55:2133–2139, 2015. © 2015 Society of Plastics Engineers     

Integration of Production Steps on a Single Equipment

The article describes a new method for integrated processing which combines high-energy heating by high frequency currents (HEH HFC) and abrasive grinding. Research clearly showed that implementation of integrated processing may lead to 2 … 2.5-fold increasing of the processing performance. It was established experimentally that the proposed integrated treatment results in increasing of the microhardness and the level of residual compressive stresses in the surface layer. This increases the contact–fatigue strength of steel parts up to 10% … 16%.     

Identifying latent dynamic components in biological systems

In computational systems biology, the general aim is to derive regulatory models from multivariate readouts, thereby generating predictions for novel experiments. In the past, many such models have been formulated for different biological applications. The authors consider the scenario where a given model fails to predict a set of observations with acceptable accuracy and ask the question whether this is because of the model lacking important external regulations. Real‐world examples for such entities range from microRNAs to metabolic fluxes. To improve the prediction, they propose an algorithm to systematically extend the network by an additional latent dynamic variable which has an exogenous effect on the considered network. This variable''s time course and influence on the other species is estimated in a two‐step procedure involving spline approximation, maximum‐likelihood estimation and model selection. Simulation studies show that such a hidden influence can successfully be inferred. The method is also applied to a signalling pathway model where they analyse real data and obtain promising results. Furthermore, the technique can be employed to detect incomplete network structures.Inspec keywords: biology computing, RNA, splines (mathematics), maximum likelihood estimation, approximation theory, biochemistryOther keywords: latent dynamic components, biological systems, computational system biology, regulatory models, multivariate readouts, biological applications, external regulations, real‐world examples, microRNA, metabolic fluxes, latent dynamic variables, variable time course, two‐step procedure, spline approximation, maximum‐likelihood estimation, model selection, signalling pathway model, real data, incomplete network structures     

The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations

Stress stability testing represents an important part of the drug development process. It is used as an important tool for the identification of degradation products and degradation pathways, as well as for the assessment of changes in physical form of drug molecules. The impact of excipients on the stability of olanzapine confirms that levels of impurities and degradants are limiting parameters and are therefore used for stability evaluation. The major degradation product of olanzapine was identified as 2-methyl-5,10-dihydro-4H-thieno[2,3-b][1,5]benzodiazepine-4-one (III). The structure of III was determined by using LC-MS, IR and NMR. Compatibility and stress stability results demonstrated that tablet formulations of olanzapine are sensitive to temperature and moisture. In samples protected from moisture, the increase in concentration of III was shown to be highly temperature dependent and the degradation followed zero-order kinetics. In addition, studies of olanzapine with excipients and in formulated tablets revealed polymorphic phase changes in some samples, influenced by a combination of stress temperature and humidity conditions. Polymorphic transitions were monitored using x-ray powder diffraction (XRPD) analysis and exhibited no correlation between the phase change (appearance of a new polymorph) and the degradation process.     

Biocompatibility and cutaneous reactivity of cellulosic polysaccharide film in induced skin wounds in rats

The development of a skin substitute suitable for immediately performing the function of the lost dermis and epidermis could result in a positive impact on the treatment of patients with extensive skin lesions. A biopolymer film was applied to skin wounds to investigate the biocompatibility and cutaneous reaction and to test its activity as a mechanical barrier and conductor in the healing process. Forty Wistar rats of both sexes were used in the present study. Two excisions were performed in the dorsal part of the skin flaps. The polysaccharide film was applied over one of the incisions and other incision was washed with saline. The time spent for complete healing of both lesions was virtually the same in both groups, during 21 days of observation. The film remained attached to the bed of the exposed wound for an average period of 6 days. There were no statistically significant differences with regard to lesion measurement area at assessment times of 2nd, 7th and 14th postoperative days. At day 21, the scar area showed a significant difference (0.0229). After 40 days, all wounds were completely healed. No statistically significant differences were found between the histological parameters assessed in the experimental and control groups. The cellulosic polysaccharide film integrated well with the tissue showing high biocompatibility and low skin reactivity.     

Residues of different gel formulations on dentinal walls: A SEM/EDS analysis

The aim of this study was to evaluate the presence of residues of sodium hypochlorite gel, chlorhexidine gel, and EDTA gel on dentinal walls after canal preparation through chemical SEM‐ elemental chemical microanalysis (EDS) analysis. Forty‐eight single‐rooted teeth were selected. They had their crowns sectioned and were instrumented with a reciprocating system. The canals were irrigated with 5 mL of saline solution during root canal preparation. After instrumentation, the root canals were irrigated with 3 mL 17% EDTA followed by 1 min of ultrasonic passive activation (3× 20 sec) to remove the smear layer, and then irrigated with 3 mL of saline solution. The specimens were randomized into three groups (n = 12) according to the chemical substance that filled the root canal for 30 min: GI: 5.5% sodium hypochlorite gel; GII: 2% chlorhexidine gel; GIII: 24% EDTA gel; Negative control group: no substance was used. Then, the root canals were irrigated with 6 mL of saline solution followed by 1 min of ultrasonic passive activation (3× 20 sec). After ultrasonic activation, the canals were irrigated with 2 mL saline. The roots were sectioned, and the percentage of each chemical element present in the samples was analyzed through chemical SEM‐EDS microanalysis. All experimental groups showed a significantly higher percentage of chemical elements (Na and/or Cl) than the control group (P < 0.03). This in vitro study has shown that, regardless of chemical solutions used even after the final irrigation protocol, chemical residues of different substances remained attached to the root canal walls. Microsc. Res. Tech. 78:495–499, 2015. © 2015 Wiley Periodicals, Inc.